|
If you need a brick driveway installed in Northern Virginia call 703 725-7945 for a free estimate. Concrete driveway can be capped with clay brick pavers if your drive way is in good shape and has the right grade. If not the old concrete driveway is removed and, placed in a dumper. After the existing slab is removed the area that needs to be poured must be leveled and graded. Phoenix Home Services uses 2x4 forms to frame the new drive way. We start with our Virginia concrete Drivetec base. Then concrete is poured in to forms for the new driveway. Concrete that is visible such as patios, driveways, walkways, and slabs needs finishing. But if the drive way is to be capped with brick this is not important. What is important is the type of brick used to cap your driveway. Paving brick is manufactured with very dense clay, and is fired at very high temperatures to produce a brick paver that’s especially tuff and resistant to moisture. After the concrete is poured it is smoothed with a straight edge. Bull floating concrete eliminates low or high spots. Steel floating should not be done until the concrete has set to a point were no cream is seen. After the drive way is laded then clay brick pavers can be set in type S mortar. Phoenix Home Services can install many types of brick patterns can be used for your new paver driveway in Northern Virginia. For any driveway you can have a running bond, basket weave, or herringbone pattern. Some of the brick material can be seen at L.C Smith: Serving the Central and Northern VA. After the brick is set it is then cleaned with acid. Phoenix Home Services installs brick drive ways in all Counties of Northern Virginia including Fairfax, Loudoun, Prince William, Arlington, and Alexandria VA. Including Annandale, Burke, Falls Church, Fairfax, Reston, Springfield, Mclean, Great Falls, and Vienna VA> |
